CABIN MOUNTS – AS
Metal rubber anti vibration cabin mounts AS type are particularly effective in vibration isolation of motors, driver cabins and other accessory unites. Typical applications of metal rubber anti vibration cabin mounts AS type are in agriculture field, earth moving machinery, off road, building and military vehicles. These parts are available in different types of steel and rubber mesh.

SILENTBLOCKS – BOC
Metal rubber anti vibration silentblocks BOC type consist of 2 tubes, both vulcanized. This allows to load them with heavy weights and get very good performances in vibration damping. Metal rubber anti vibration silentblocks BOC type can be used to insulate vehicles, tilt cabins, joint and shaking arms, all kind of piston rods. The high precision mechanic machining operation carried out after moulding guarantees maximum dynamic properties and duration. Metal rubber anti vibration silentblocks BOC type can stand all movements in any directions, they damp shocks and vibration transmission.

SILENTBLOCKS – BOC-I
Characteristic of metal rubber anti vibration silentblocks BOC-I type is the partial moulding. This allows them to guarantee good isolation for load but also to damp high and ongoing torsion moments with very high torsion angles. Fields of application for metal rubber anti vibration silentblocks BOC-I type are: agriculture, earth moving, axles and railways.

HEXCENTRIC SILENTBLOCKS – BOC-FA
Metal rubber hexcentric silentblocks BOC-FA type has rubber profile that provides high resistance to radial loads. The internal tube is hexcentric in respect of the outer one as to allow load in one direction only. They are particularly recommended to isolate tiltable cabin and axle applications.

RUBBER SILENTBLOCKS – BOC-G
Anti vibration rubber silentblocks BOC-G type have only one tube with vulcanized rubber on the outer diameter. They fit perfectly in the application seat and can provide very good isolation and damping for radial and torsional loads. Fields of application of anti vibration rubber silentblocks BOC-G type are: agriculture, earth moving, axles and leaf springs.

MACHINE FEET – T
Anti vibration metal rubber machine feet T type have been designed to reach the best vibration isolation values and damping in heavy static applications. These mounts are produced both with through hole and central threaded nut, with oval and square base. Fields of application for Anti vibration rubber metal machine feet T type: power generation unites, motor, machinery and frame supports, motor pumps.

MACHINE FEET – T-AS
Anti vibration metal rubber machine feet T-AS type have been designed to reach the best vibration isolation values and damping in heavy static applications. These mounts are produced with central threaded nut and fail safe system, with oval and square base. They are mainly suitable for applications where high resistance and safety have to be guaranteed. Application fields for anti vibration rubber metal machine feet T-AS type are power generation unites, frame, motor and machinery supports, motor pumps.

MACHINE FEET – T-N
Anti vibration metal rubber machine feet T-N type have been designed to reach the best vibration isolation values and damping in static and dynamic applications. These mounts are produced with central threaded nut and fail safe system, with oval and square base. They are mainly suitable for applications where high resistance, safety and vibration damping have to be guaranteed. Application fields for anti vibration rubber metal machine feet T-N type are power generation unites, motor and machinery supports, marine, excavators, asphalt distributors, compactors and agriculture.

MACHINE FEET – T-W
Anti vibration metal rubber machine feet T-W type have been designed to reach the best vibration isolation values and damping in static and dynamic applications. These mounts are produced with central threaded nut and fail safe system, with oval and square base. They are mainly suitable for applications where high resistance, safety and vibration damping have to be guaranteed. Application fields for anti vibration rubber metal machine feet T-W type are power generation unites, pump groups, motor and machinery supports, marine, excavators, asphalt distributors, compactors and agriculture.

MACHINE FEET – TAB
Anti vibration metal rubber machine feet TAB type have been developed to solve vibration issues caused by one, two and three cylinder motors. These mounts are produced in a special rubber compound that allows efficient damping, vibration isolation and limits movement on the three axis at the same time. Anti vibration metal rubber machine feet TAB type are suitable for applications with low rounds per minute and wide vibrations. Application fields are motors, heart moving machines, power generation, off road and marine.

LEVELLING SYSTEMS – LA
LA levelling systems are available in various pin lengths and thread sizes. They can be fixed on most part of anti vibration metal rubber machine feet type T, marine mounts type MAR and in any case of need for motor height adjustment to have it in flat position. Levelling unites type LA are used in motor, marine and power generation field.

LEVELLING SYSTEMS – LAD
LAD levelling systems are available in various pin lengths and thread sizes. Differently from LA levelling systems they have a levelling rate by millimetre, to guarantee particularly precise levelling. LAD levelling systems can be fixed on most part of anti vibration metal rubber machine feet type T, marine mounts type MAR and in any case of need for motor height adjustment to have it in flat position. Levelling unites type LAD are used in motor, marine and power generation field.

ANTIVIBRATION MOUNTS – M0P
Anti vibration metal rubber mounts MOP type are mainly suitable for low frequencies and vibrations isolation on all planes. An excellent hit damping is reached thanks to their high deflection rates. Anti vibration mounts MOP type are mainly suitable for isolation of passive vibrations in electronic instruments, measurement instruments, test cells, exhaust pipes, compressors, cooling unites, ventilators, air blowers, engines for quod motorcycles driving without driving licence, with pumps and vibration sieves.

MARINER MOUNTS – MAR
Anti vibration metal rubber mariner mounts MAR type have been developed mainly for vibration damping in boat motors, industry, earth moving machines, wind power generator cells, pumps, compressors, power generators. Anti vibration metal rubber mariner mounts MAR type provide very good isolation in case of high static and dynamic loads. These mounts were designed for effective vibration and noise isolation.

CABIN MOUNTS – MPG
Anti vibration metal rubber cabin mounts MPG type was developed for damping high dynamic shocks on 3 axes with considerable radial stiffness. The specific design provides high safety also during rops tests because the anti vibration metal rubber cabin mount MPG type is provided with safety stop as requested by current norms. These mounts were developed for isolation of cabin, frame and motor support in the field of earth-moving.

MACHINE FEET – P
When an anti vibration metal rubber machine foot P type is fit, it is not necessary to fix the machine to the ground because It provides good adhesion to the floor. The rubber contour of anti vibration metal rubber machine feet P type guarantees shock isolation and vibration damping. Depending on application requests, these mounts can be produced in oil, chemical and atmospheric agents resistant rubber. Our anti vibration metal rubber machine feet P type with height adjustment can fit different types of tool machines, conveyors and control panels.

MACHINE FEET – PSE
When an anti vibration metal rubber machine foot P type is fit, it provides very good adhesion to the floor. The rubber contour and volume of anti vibration metal rubber machine feet type PSE guarantees shock isolation and vibration damping. Depending on application requests, they can be produced in oil, chemical and atmospheric agents resistant rubber. Our anti vibration metal rubber machine feet PSE type can fit different types of applications: white industry, textile machineries, weighing devices, office machines and electrical motors.

ANTI VIBRATION MOUNTS – MO
Anti vibration metal rubber mounts MO type were developed for isolation in electronic fields, to support electrical cabinets, PLC, switchboards, radiators, cooling unites and cabins also in military field. These mounts are very easy to fit and provide full safety in case of shocks. Anti vibration metal rubber mounts MO type provide very good solution in vibration damping.

CONICAL MOUNTS – CONO
Anti vibration metal rubber conical mounts CONO type are mainly used for damping when huge deflection in axial direction with reduced deflection in radial direction are requested. These mounts guarantee isolation and full safety in case of shocks. Field of application of anti vibration metal rubber conical mounts CONO types are motors, cabins, frames of off road and earth moving vehicles, railways and cooling systems. Our anti vibration metal rubber conical bearings CONO type are available in various types of steels and rubbers, to cover the wide range of applications.

CONICAL MOUNTS – CONO-A
Anti vibration metal rubber conical mounts CONO-A type have slots in the rubber section to stand combined deflections in axial and radial direction. These mounts guarantee damping, isolation and full safety in case of shocks. Fields of application of anti vibration metal rubber conical mounts CONO-A type are motors, cabins, frames of off road and earth moving vehicles, railways and cooling systems. Our anti vibration metal rubber conical bearings CONO-A type are available in various types of steels and rubbers, to cover the wide range of applications.

CONICAL MOUNTS – MET
Anti vibration metal rubber conical mounts MET type are mainly used for damping when huge deflection in axial direction and high vibration damping are requested. These mounts guarantee full safety in case of shocks. Fields of application of anti vibration metal rubber conical mounts MET type are motors, cabins, frames of off road and earth moving vehicles, railways and cooling systems. Our conical bearings MET type are available in various types of steels and rubbers, to cover the wide range of applications.

CONICAL MOUNTS – MET-A
Anti vibration metal rubber conical mounts MET-A type have slots in the rubber section to stand combined deflections in axial and radial direction. These mounts guarantee damping, isolation and full safety in case of shocks. Fields of application of anti vibration metal rubber conical mounts MET-A type are motors, cabins, frames of off road and earth moving vehicles, railways and cooling systems. Our conical bearings MET-A type are available in various types of steels and rubbers, to cover the wide range of applications.

SPHERICAL BEARINGS – SNS
Anti vibration metal rubber spherical bearings SNS type are heavy duty flexible mounts providing high performances damping under heavy radial, axial and cardanic loads. Applications of anti vibration metal rubber spherical bearings SNS type are isolation of: suspensions, oscillating arms, railway trucks, off road vehicles. Their geometric shape guarantee full safety in case of impact break thanks to their internal safety stop system.

ANTI VIBRATION MOUNTS – PGK
Anti vibration rubber mounts PGK type stand heavy loads and deflections, therefore it is mainly suitable for applications in low frequency. Fitting is very easy, anti vibration rubber mount PGK is suitable for isolation of heavy machineries. Typical application is damping in paper industries, mixers, industrial ventilators and cooling plants.

ANTI VIBRATION MOUNTS – S-8524
Anti vibration metal rubber mounts S-8524 type are extremely versatile. Thanks to big rubber volume and to the possibility of choosing the most suitable internal metallic component for the application, the anti vibration metal rubber mount S-8524 type can adapt itself both to requested vibration damping and to applied static load. Typical application is isolation of: motors, cabins, frames, earth moving and agriculture machineries.

ANTI VIBRATION MOUNTS – S-8560
Anti vibration metal rubber mounts S-8560 type was designed to simplify fitting of components in the production line of tractors and excavators. This mount was developed to stand heavy loads and provide long service intervals. Typical application is isolation of: motors, cabin frames and big power generators.

ANTI VIBRATION MOUNTS – S-080
Anti vibration metal rubber mounts SUP type were developed for damping of high dynamic shock loads in full safety. Thanks to the big rubber volume and types, the driving comfort is guaranteed. Typical applications of anti vibration metal rubber mounts SUP type are: tractors, earth-moving machines, heavy industry, bus and off road vehicles.

CYLINDRICAL MOUNTS – A-B-C-D-E-AK
Thanks to a wide range of components and rubbers, anti vibration metal rubber cylindrical mounts can be customized to fully comply with the application requests. Cylindrical mounts are ideal for isolation in compression applications in all fields: earth moving machinery, general industry, bus, off road, tractors, wellness, white industry, motorcycle, air conditioning.

CYLINDRICAL MOUNTS – DC-DP
Thanks to a wide range of components and rubbers, anti vibration metal rubber cylindrical mounts DC-DP can be customized to fully comply with the application requests. Cylindrical mounts DC-DP are ideal for isolation as bump stops and stop buffers in all fields: earth moving machinery, general industry, bus, off road, tractors, wellness, white industry, motorcycles, air conditioning.

RING BUFFER

Anti vibration metal rubber ring buffers are suitable for low frequency shear/compression loads: they provide damping, isolation and high response to flections at low loads. Mainly appropriated to protect electronic and medical instruments, light apparatus from vibrations and shocks.

BS BUFFER

Anti vibration metal rubber BS buffers have been designed to provide best protection to the upper structures. BS buffers can damp hits and insulate very well with progressive release of spring travel. This is possible thanks to the geometrical shape and high quality of production mesh. Typical applications are dump trucks, off-road vehicles, cranes, handling equipment